Going against the flow

Decorative photograph of a mountain riverLast week I wrote about research we have been carrying out over the last decade that is being applied to large scale structures in the aerospace industry (see ‘Slowly crossing the valley of death‘ on January 27th, 2021). I also work on very much smaller ‘structures’ that are only tens of nanometers in diameter, or about a billion times smaller than the test samples in last week’s post (see ‘Toxic nanoparticles?‘ on November 13th, 2013). The connection is the use of light to measure shape, deformation and motion; and then utilising the measurements to validate predictions from theoretical or computational models. About three years ago, we published research which demonstrated that the motion of very small particles (less than about 300 nanometres) at low concentrations (less than about a billion per millilitre) in a fluid was dominated by the molecules of the fluid rather than interactions between the particles (see Coglitore et al, 2017 and ‘Slow moving nanoparticles‘ on December 13th, 2017). This data confirmed results from earlier molecular dynamic simulations that contradicted predictions using the Stokes-Einstein equation, which was derived by Einstein in his PhD thesis for a ‘Stokes’ particle undergoing Brownian motion. The Stokes-Einstein equation works well for large particles but the physics of motion changes when the particles are very small and far apart so that Van der Waals forces and electrostatic forces play a dominant role, as we have shown in a more recent paper (see Giorgi et al, 2019).  This becomes relevant when evaluating nanoparticles as potential drug delivery systems or assessing the toxicological impact of nanoparticles.  We have shown recently that instruments based on dynamic scattering of light from nanoparticles are likely to be inaccurate because they are based on fitting measurement data to the Stokes-Einstein equation.  In a paper published last month, we found that asymmetric flow field flow fractionation (or AF4)  in combination with dynamic light scattering when used to detect the size of nanoparticles in suspension, tended to over-estimate the diameter of particles smaller than 60 nanometres at low concentrations by upto a factor of two (see Giorgi et al, 2021).  Someone commented recently that our work in this area was not highly cited but perhaps this is unsurprising when it undermines a current paradigm.  We have certainly learnt to handle rejection letters, to redouble our efforts to demonstrate the rigor in our research and to present conclusions in a manner that appears to build on existing knowledge rather than demolishing it.

Sources:

Coglitore, D., Edwardson, S.P., Macko, P., Patterson, E.A. and Whelan, M., 2017. Transition from fractional to classical Stokes–Einstein behaviour in simple fluids. Royal Society open science, 4(12), p.170507.

Giorgi, F., Coglitore, D., Curran, J.M., Gilliland, D., Macko, P., Whelan, M., Worth, A. and Patterson, E.A., 2019. The influence of inter-particle forces on diffusion at the nanoscale. Scientific reports, 9(1), pp.1-6.

Giorgi, F., Curran, J.M., Gilliland, D., La Spina, R., Whelan, M.P. & Patterson, E.A. 2021, Limitations of nanoparticles size characterization by asymmetric flow field-fractionation coupled with online dynamic light scattering, Chromatographia, doi.org/10/1007/s10337-020-03997-7.

Image is a photograph of a fast flowing mountain river taken in Yellowstone National Park during a roadtrip across the USA in 2006.

Slowly crossing the valley of death

A view of a valleyThe valley of death in technology development is well-known amongst research engineers and their sponsors. It is the gap between discovery and application, or between realization of an idea in a laboratory and its implementation in the real-world. Some of my research has made it across the valley of death, for example the poleidoscope about 15 years ago (see ‘Poleidoscope (=polariscope+kaleidoscope)‘ on October 14th, 2020).  Our work on quantitative comparisons of data fields from physical measurements and computer predictions is about three-quarters of the way across the valley.  We published a paper in December (see Dvurecenska et al, 2020) on its application to a large panel from the fuselage of an aircraft based on work we completed as part of the MOTIVATE project.  I reported the application of the research in almost real-time in a post in December 2018 (see ‘Industrial Uncertainty‘ on December 12th, 2018) and in further detail in May 2020 as we submitted the manuscript for publication (‘Alleviating industrial uncertainty‘ on May 13th, 2020).  However, the realization in the laboratory occurred nearly a decade ago when teams from Michigan State University and the University of Liverpool came together in the ADVISE project funded by EU Framework 7 programme (see Wang et al, 2011). Subsequently, the team at Michigan State University moved to the University of Liverpool and in collaboration with researchers at Empa developed the technique that was applied in the MOTIVATE project (see Sebastian et al 2013). The work published in December represents a step into the valley of death; from a university environment into a full-scale test laboratory at Empa using a real piece of aircraft.  The MOTIVATE project involved a further step to a demonstration on an on-going test of a cockpit at Airbus which was also reported in a post last May (see ‘The blind leading the blind‘ on May 27th, 2020).  We are now working with Airbus in a new programme to embed the process of quantitative comparison of fields of measurements and predictions into their routine test procedures for aerospace structures.  So, I would like to think we are climbing out of the valley.

Image: not Death Valley but taken on a road trip in 2008 somewhere between Moab, UT and Kanab, UT while living in Okemos, MI.

Sources:

Dvurecenska, K., Diamantakos, I., Hack, E., Lampeas, G., Patterson, E.A. and Siebert, T., 2020. The validation of a full-field deformation analysis of an aircraft panel: A case study. The Journal of Strain Analysis for Engineering Design, p.0309324720971140.

Sebastian, C., Hack, E. and Patterson, E., 2013. An approach to the validation of computational solid mechanics models for strain analysis. The Journal of Strain Analysis for Engineering Design, 48(1), pp.36-47.

Wang, W., Mottershead, J.E., Sebastian, C.M. and Patterson, E.A., 2011. Shape features and finite element model updating from full-field strain data. International Journal of Solids and Structures, 48(11-12), pp.1644-1657.

For more posts on the MOTIVATE project: https://realizeengineering.blog/category/myresearch/motivate-project/

The MOTIVATE project has received funding from the Clean Sky 2 Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 754660 and the Swiss State Secretariat for Education, Research and Innovation under contract number 17.00064.

The opinions expressed in this blog post reflect only the author’s view and the Clean Sky 2 Joint Undertaking is not responsible for any use that may be made of the information it contains.

We are drowning in information while starving for wisdom

Decorative image: Lake Maggiore from AngeraThe title of this post is a quote from Edward O. Wilson’s book ‘Consilience: The Unity of Knowledge‘. For example, if you search for scientific papers about “Entropy” then you will probably find more than 3.5 million. An impossible quantity for an individual to read and even when you narrow the search to those about “psychological entropy”, which is a fairly niche topic, you will still find nearly 500 papers – a challenging reading list for most people.  The analysis of the trends embedded in scientific papers has become a research activity in its own right, see for example Basurto-Flores et al 2018 on papers about entropy; however, this type of analysis seems to generate yet more information rather than wisdom.  In this context, wisdom is associated with insight based on knowledge and experience; however the quality of the experiences is important as well as the processes of self-reflection (see Nicholas Weststrate’s PhD thesis).  There are no prizes for wisdom and we appoint and promote researchers based on their publication record; hence it is unsurprising that editors of journals are swamped by thousands of manuscripts submitted for publication with more than 2 million papers published every year.  The system is out of control driven by authors building a publication list longer than their competitors for jobs, promotion and grant funding and by publishers seeking larger profits from publishing more and bigger journals.  There are so many manuscripts submitted to journals that the quality of the reviewing and editing is declining leading to both false positive and false negatives, i.e. papers being published that contain little, if any, original content or lacking sufficient evidence to support their conclusions  and highly innovative papers being rejected because they are perceived to be wrong rather than simply deviating from the current paradigm. The drop in quality and rise in quantity of papers published makes keeping up with the scientific literature both expensive and inefficient in terms of time and energy, which slows down acquisition of knowledge and leaves less time for reflection and gaining experiences that are prerequisites for wisdom. So what incentives are there for a scientist or engineer to aspire to be wise given the lack of prizes and career rewards for wisdom?  In Chinese thought wisdom is perceived as expertise in the art of living, the ability to grasp what is happening, and to adjust to the imminent future (Simandan, 2018).  All of these attributes seem to be advantageous to a career based on solving problems but you need the sagacity to realise that the rewards are indirect and often intangible.

References:

Basurto-Flores, R., Guzmán-Vargas, L., Velasco, S., Medina, A. and Hernandez, A.C., 2018. On entropy research analysis: cross-disciplinary knowledge transfer. Scientometrics, 117(1), pp.123-139.

Simandan, D., 2018. Wisdom and foresight in Chinese thought: sensing the immediate future. Journal of Futures Studies, 22(3), pp.35-50.

Nicholas M Weststrate, The examined life: relations amoong life experience, self-reflection and wisdom, PhD Thesis, University of Toronto, 2017.

Edward O. Wilson, Consilience: the unity of knowledge, London, Little Brown and Company, 1998.

Distancing ourselves from each other

Image of a person behind a camera‘The camera lens was our way of disengaging from each other, distancing ourselves from each other’s emotions.’ At the moment, we are using the camera lens in our computer or mobile phone to distance ourselves physically from colleagues, friends and relatives in order to hinder the spread of coronavirus. However, the camera lens also allows us to disengage emotionally from one another as JG Ballard wrote thirty years ago in his novel called ‘The Kindness of Women‘ from which the opening sentence is taken.  It is relatively easy to avoid giving emotional cues to your interlocutor when they can only see a flat image of your face.  I am unsure whether JG Ballard would have anticipated our virus-induced socially-distanced world but he would certainly have recognised the rather flat discussions that we tend to have in our internet meetings.

Source: JG Ballard, The Kindness of Women, London: Fourth Estate, 2014 (first published 1991).

Image from StockSnap