Last month when I was in Taiwan [see ‘Ancient Standards‘ on January 29th, 2020] , I visited Kuosheng Nuclear Power Plant which has a pair of boiling water reactors that each generate 986 MWe, or between them about 7% of Taiwan’s electricity. The power station is approaching the end of its licensed life in around 2023 after being constructed in 1978 and delivering electricity commercially for about 40 years, since the early 1980’s. There is an excellent exhibition centre at the power station that includes the life-size mock-up of the reinforcement rods in the concrete of the reactors shown in the photograph. I am used to seeing reinforcing bar, or rebar as it is known, between 6 to 12mm in diameter on building site, but I had never seen any of this diameter (about 40 to 50mm diameter) or in such a dense grid. On the other hand, we are not building any nuclear power stations in the UK at the moment so there aren’t many opportunities to see closeup the scale of structure required.
Earlier this summer, when we were walking the South West Coastal Path [see ‘The Salt Path‘ on August 14th, 2019], we frequently saw kestrels hovering above the path ahead of us. It is an enthralling sight watching them use the air currents around the cliffs to soar, hang and dive for prey. Their mastery of the air looks effortless. What you cannot see from the ground is the complex motion of their wing feathers changing the shape and texture of their wing to optimise lift and drag. The base of their flight feathers are covered by small flexible feathers called ‘coverts’ or ‘tectrix’, which in flight reduce drag by providing a smooth surface for airflow. However, at low speed, such as when hovering or landing, the coverts lift up and the change the shape and texture of the wing to prevent aerodynamic stalling. In other words, the coverts help the airflow to follow the contour of the wing, or to remain attached to the wing, and thus to generate lift. Aircraft use wing flaps on their trailing edges to achieve the same effect, i.e. to generate sufficient lift at slow speeds, but birds use a more elegant and lighter solution: coverts. Coverts are deployed passively to mitigate stalls in lower speed flight, as in the picture. When I was in the US last month [see ‘When upgrading is downgrading‘ on August 21st, 2019], one of the research reports was by Professor Aimy Wissa of the Department of Mechanical Science & Engineering at the University of Illinois Urbana-Champaign, who is working on ‘Spatially distributed passively deployable structures for stall mitigation‘ in her Bio-inspired Adaptive Morphology laboratory. She is exploring how flaps could be placed over the surface of aircraft wings to deploy in a similar way to a bird’s covert feathers and provide enhanced lift at low speeds. This would be useful for drones and other unmanned air vehicles (UAVs) that need to manoeuvre in confined spaces, for instance in cityscapes.
I must admit that I had occasionally noticed the waves of fluttering small feathers across the back of a bird’s wing but, until I listened to Aimy’s presentation, I had not realised their purpose; perhaps that lack of insight is why I specialised in structural mechanics rather than fluid mechanics with the result that I was worrying about the fatigue life of the wing flaps during her talk.
The picture is from a video available at Kestrel Hovering and Hunting in Cornwall by Paul Dinning.