Category Archives: Soapbox

Small is beautiful and affordable in nuclear power-stations

4 Replies

Most of you will have domestic carbon footprints that are similar to mine, i.e. dominated by energy consumption, probably mainly your car and climate control in your home, and you will struggle to reduce your footprint [see my post entitled ‘New Year Resolution’ on December 31st, 2014]. We live in a fossil fuel economy and so even if you make your home entirely powered by electricity and buy a plug-in car then your utility provider is still very likely to use fossil fuel to generate the electricity supplied to you and your carbon emissions will have been simply moved elsewhere. If you are lucky enough to live in a suitable location then installing geothermal, solar or wind power for your home might be viable; but otherwise the majority of us are dependent on power-stations for our electricity.

I discussed the impossibility, with today’s technology, of providing all of our electrical power needs using renewable sources in my post entitled ‘Energy Blending‘ on May 22nd, 2013. The alternatives are either to reduce our power consumption dramatically, which seems unlikely to happen given that everyone would like to enjoy the lifestyle of typical readers of blogs, or to build a very large number of nuclear power stations.  The scale of the problem facing China was the topic of my post entitled ‘Mass-produced nuclear power plants‘ on November 12th, 2014 and it is many times large on a global scale.

A major obstacle to building nuclear power-stations is their exorbitant capital cost, e.g. £24 billion for the planned Hinckley Point C reactor in the UK. This level of investment is beyond the reach of most companies and the construction of a fleet of such power-stations to provide national needs is beyond the budget of most national governments. Small modular reactors (SMR), whose components could be mass-produced and assembled on-site, have been proposed and both their small size and the manufacturing approach would lead to considerable reductions in unit costs. Although many designs for SMRs are under development, with mature designs in China and India, progress towards implementation and mass-production is slow so that the situation is ripe for a disruptive technology from another industrial sector to transform the nuclear power landscape. One possible candidate is the fusion reactor being developed by Lockheed Martin’s Skunk works [see my post entitled ‘Mass-produced nuclear power plants‘ on November 12th, 2014] or the Travelling Wave Reactor being developed by the spin-out company TerraPower.

We need to think big about small affordable solutions instead of thinking and spending big money on massive projects that tend towards a big unaffordable solution.

Also see Bill Gates on Energy-Miracles

Cow bladders led to modern strain measurement

1 Reply

 

softball figureSir David Brewster was a prolific experimentalist who published seven papers in the Philosophical Transactions of the Royal Society during 1815 and 1816. In his report dated October 22nd, 1814 that was published by the Royal Society one hundred years ago in January 1815, he described his observations on the depolarisation in more than fifty materials as diverse as sulphur and the bladder of a cow. He followed this with a series of experiments on glass sheets subject to various loads and reported his observations in the of photographic plates that show photoelastic fringe patterns which would become instantly recognisable to generations of engineers. Two hundred year later, digital technology has revolutionised photoelasticity so that it is no longer necessary to generate fringes that can be ‘seen’, as in Brewster’s experiments. Instead, digital sensors allow us to measure changes in light intensity that are undetectable to the naked eye and digital computers permit the processing of arrays of tens of thousands of measurements in less than the blink of an eye to yield maps of strain magnitude and direction in complex components. However, the principles employed in digital photoelasticity are the same as those first elucidated by Brewster and involve collecting images at multiple rotational steps of one or more of the polarising elements in a polariscope and then using Fourier analysis or matrix algebra to solve the equations describing the stress-optic law, i.e. the relationship between the applied stress and the observed change in transmitted light intensity. A polariscope is the term given to the series of polarisers and quarter-waveplates used by almost every photoelastician since Brewster to observe photoelastic fringes. One of Brewster’s other great inventions was the kaleidoscope of which there is an early example in the Science Museum in London. Recently, the concept of the kaleidoscope has been combined with a polariscope to create the poleidoscope that allows the multiple images required for digital photoelasticity to be acquired simultaneously, which is useful for dynamic applications such as in the impact example shown in the picture. These advances allow digital photoelasticity to be used not only by laboratory-based stress analysts but also in quality assurance procedures, for instance to monitor in real-time the stresses induced in float glass during production, or to investigate the residual stress in silicon wafers using infra-red light.

The picture shows a sequence of maps of photoelastic fringe order (right) showing the stress induced in an epoxy resin block when impacted by a soft ball falling under gravity (left). The maps were obtained using a precursor to the poleidoscope and a high-speed digital camera recording 4000 frames per second for the 10x10mm area shown by the white box in the schematic.

For more a little more on photoelasticity see http://www.experimentalstress.com/basic_experimental_mechanics/photoelasticity.htm

Sources:

Brewster, D., Experiments on the depolarisation of light as exhibited by various mineral, animal , and vegetable bodies, with a reference of the phenomena to the general principles of polarisation, Phil. Trans. R. Soc. Lond. 105:29-53, 1815. http://rstl.royalsocietypublishing.org/content/105/29.full.pdf+html

Brewster, D., On the communication of the structure of doubly refracting crystals to glass, muriate of soda, fluor spar, and other substances by mechanical compression and dilatation, Phil. Trans. R. Soc. Lond. 106:156-178, 1816. http://rstl.royalsocietypublishing.org/content/106/156.full.pdf+html

Ramesh, K., Kasimayan, T., Neethi Simon, B., Digital photoelasticity – a comprehensive review, J. Strain Analysis, 46(4):245-266, 2011. http://sdj.sagepub.com/content/46/4/245.abstract

www.sciencemuseum.org.uk/online_science/explore_our_collections/objects/index/smxg-3823?agent=smxg-52657

Lesniak, J.R., Zhang, S.J., Patterson, E.A., The design and evaluation of the poleidoscope: a novel digital polariscope, Experimental Mechanics, 44(2):128-135, 2004.

Hobbs, J.W., Greene, R.J., Patterson, E.A., 2003, A novel instrument for transient photoelasticity, Experimental Mechanics, 43(4):403-409, 2003.

New Year Resolution

7 Replies

I started 2014 with a post on January 1st about the ‘Knowledge Economy‘ in which I extolled the virtues of knowledge-based rather than energy-based agriculture and engineering.  At the end of the year, oil prices have dropped from $110 to about  $60 per barrel, making it likely that in most countries the energy-based economy will continue to dominate.  In the USA, sales are rising of huge gas-guzzling cars, such as the Escalade, which is 5.15m (17ft) long, weighs 2.59 tonnes and only manages an average of 17 miles per gallon!  Fossil fuels account for approximately 80% of world energy consumption and are responsible for most greenhouse gas production.  During 2014 it was reported that greenhouse gases were rising at the fastest rate for 30 years but still the countries of the UN meeting in Lima before Christmas only agreed that those countries who were ‘ready to do so’ should submit national pledges on cutting emissions in the first of quarter of 2015.

The global average temperature is within one degree of the maximum temperature in the last million years, and a 2 degree rise would be equal to the temperature three million years ago when the sea level was 15 to 23m (80 to 130 feet) higher.  A 1 metre rise in sea level would displace 145 million people, and there is evidence that it has been  rising at 3.5mm per year during the last 20 years which is twice as fast as during the previous 80 years.

How bad does the condition of the planet need to get before effective action is taken?  How many more islands, like the Carteret Islands, will have to disappear?  How many more people than the 7 million in 2012 will have to die prematurely as a consequence of air pollution? Cities such as Beijing are beginning to be described as ‘almost uninhabitable’.  Kofi Annan has suggested that grass roots action is needed because our leaders will not take action in time. So tonight make it your New Year Resolution to reduce your carbon footprint in 2015 by 15%.

Estimate your current carbon footprint using an on-line calculator and starting working out how to reduce it.  If you want to find out the carbon footprint of your organization then the Carbon Trust has useful information and services.

Sources:

‘Inside Beijing’s airpocalypse – a city made “almost uninhabitable” by pollution‘ by Oliver Wainwright in The Guardian on Tuesday 16th December, 2014.

Blockstein DE, Wiegman L, The Climate Solutions Consensus. Island Press, Washington, 2010.

Links to previous posts:

‘Year of Air:2013‘ on November 20th, 2013 or ‘Mass-produced nuclear power plants?‘ on November 12th, 2014.

Is Earth a closed system? Does it matter?

4 Replies
Earth's annual global mean energy budget, from Kiehl and Trenberth 1997

Earth’s annual global mean energy budget, from Kiehl and Trenberth 1997

The dictionary definition of a system is ‘a set of things working together as parts of a mechanism or an interconnecting network; a complex whole’. So it is easy to see why ‘systems engineering’ has become ubiquitous: because it is difficult to design anything in engineering that is not some kind of system.  Perhaps the earliest concept of a system in post-industrial revolution engineering is the thermodynamic system, which is a well-defined quantity of matter that can exchange energy with its environment.

Engineers define thermodynamic systems by drawing arbitrary boundaries around ‘quantities of matter’ that are of interest, for instance the contents of a refrigerator or the inside of the cylinder of a diesel engine [see my post entitled ‘Drawing Boundaries‘ on December 19th, 2012].  These boundaries can be permeable to matter in which case the system is described as an ‘open system’, as in the case of an diesel engine cylinder into which fuel is injected and exhaust gases ejected. Conversely, the boundary of a ‘closed system’ is impermeable to matter, i.e. the refrigerator with the door closed.  The analysis of a closed system is usually much simpler than for an open one.  In his Gaia theory, James Lovelock proposed that the Earth was a self-regulated complex system.  Is it also a closed thermodynamic system?  It is clear that energy exchange occurs between the Earth and its surroundings as a consequence of solar radiation incident on the Earth (about 342 Watts/square meter) and radiation from the Earth as a consequence of reflection of solar radiation (about 107 Watts/square meter) and its temperature (235 Watts/square meter).  This implies that we can consider the Earth as a thermodynamic system.  The Earth’s gravitation field ensures that nothing much leaves; at the same time the vast of emptiness of space means that collisions with matter happen only very occasionally, so the inward flow of matter to Earth is negligible.  So, perhaps we could approximate Earth as a closed thermodynamic system.

Does it matter?  Yes, I believe so, because it influences how we think about our complex life support system, or spaceship Earth that sustains and protects us, as Max Tegmark describes it in his book ‘Our Mathematical Universe’.  In a closed system there is finite amount of matter that cannot be replenished, which implies that the Earth’s resources are finite.  However, our current western lifestyle is focused on consumption which is incompatible with a sustainable society in a closed system.  Even the Earth’s energy balance appears to be in equilibrium based on the data in the figure and so we should be careful about massive schemes for renewable energy that might disturb the Gaia.

Sources:

Kiehl, J.T., and Trenberth, K.E., 1997, Earth’s annual global mean energy budget, Bulletin – American Meteorological Society, 78(2):197-208.

Thess, A., The Entropy Principle – Thermodynamics for the Unsatisfied, Springer-Verlag, Berlin, 2011.

Tegmark, M., Our Mathematical Universe, Penguin Books Ltd, 2014.